Paul TigerB6
|
| posted on 3/3/09 at 03:53 PM |
|
|
Identification of "stuff" on GSXR600 SRAD carbs
Can someone tell me what the two black units are (each seems to be connected to a pair of carbs), which are bolted to the underside of the GSXR carbs
please. They have twin hoses going into / out of each and a two pin electrical connection on.
I am guessing they are part of the emmissions control (air injection maybe), as are the 4 the multitude of hoses that connect to the 4 brass inlets on
the lower part of the carbs??
Do these need blocking off or leaving open to air??
Should say these have been respaced and are going on a boat anchor........ sorry...... Pinto 
.jpg)
[Edited on 3/3/09 by Paul TigerB6]
|
|
|
|
|
cryoman1965
|
| posted on 3/3/09 at 05:07 PM |
|
|
Not required. Block the hoses off.
Nige
|
|
|
Paul TigerB6
|
| posted on 3/3/09 at 05:10 PM |
|
|
Excellent thanks. Guessed they must be a pair of solenoid valves from the manual - can find very little on them there!! Will remove them and block the
pipes up this evening then
Cheers
Paul
|
|
|
