oliwb
|
| posted on 1/3/06 at 10:55 AM |
|
|
Megajolt Maps
Hi does anyone know of any good websites with lots of maps to download.....been on the picasso (megajolt) one but not really much there, especially
not for a 1.6 pinto running bike carbs and a full race cam etc etc.....(oh to be an innovator) Closest I can seem to get is from Matt's (fellow
Tiger builder) site which is for a 2L pinto and webbers - not ideal as the bike carbs tend to give more lower down, but lack tope end (almost opposite
of sidedraft webbers really!) Cheers in advance.....Oli.
Ps.
By innovator I meant unusual not the first before anyone tries to have a go!
If your not living life on the edge you're taking up too much room!
|
|
|
|
|
dave1888
|
| posted on 1/3/06 at 02:20 PM |
|
|
check with paulf, i think he does or has maps for megajolt.
|
|
|
paulf
|
| posted on 1/3/06 at 05:50 PM |
|
|
I have a few maps, but Oli will have them on the installation Cd, I havent seen any for a pinto with bike carbs so am afraid it wil be a trial and
error set up.
When I mapped my crossflow I just put in a 2d map with a safe maximum advance and then adjusted by trial and error.As long as the max advance is not
set to high at high load settings, it should be possible to get a good set up without endangering the engine.
Im not sure of a safe advance figure to use for a pinto but would think an existing pinto map will provide a starting point.
Paul.
quote:
Originally posted by dave1888
check with paulf, i think he does or has maps for megajolt.
|
|
|
oliwb
|
| posted on 2/3/06 at 09:02 AM |
|
|
Ok, thats cool. We were going to havbe a go at making our own anyway (can't resist the urge to fiddle! But was just looking for something for
now that is pretty close....at moment the car seems to be running fine on the safe map thats already on the megajolt.....Cheers Oli.
If your not living life on the edge you're taking up too much room!
|
|
|
.jpg)
