Markp
|
| posted on 12/3/06 at 05:31 PM |
|
|
Jenvey problem
I have just received the throttle linkage to go with the raceline jenvey throttle bodies.
Has any one fitted these and had a problem with the clearance between the linkage and the body of the throttle body??
I'm not going to get a file on it as these were too expensive to bodge up.
Any ideas??
Cheers Mark
 
Rescued attachment jenvey.jpg
|
|
|
|
|
mookaloid
|
| posted on 12/3/06 at 05:55 PM |
|
|
Just guessing - not tried them myself, but perhaps the arm will go on in a different position say 90 Deg from where you have it?
HTH
Mark
|
|
|
Mix
|
| posted on 12/3/06 at 06:11 PM |
|
|
Mine is exactly the same. I plan to shorten the thread and use a half nut secured with thread lock.
Mick
|
|
|
Tigger
|
| posted on 12/3/06 at 06:57 PM |
|
|
Will the linkage attach to the arm on the other end.
In other words, can you make it a pull arrangement rather than a push (or vice versa) ??
Tigger
|
|
|
Markp
|
| posted on 12/3/06 at 07:01 PM |
|
|
some good suggestions I'll try thank.
Cal vinx - hinesight (spelling ) is a wounderful thing, thanks for making me feel better 
Mark
|
|
|
