jimbona2
|
posted on 31/3/08 at 05:42 PM |
|
|
where to buy
hi,
im going the throttle body route for my zetec but where can I buy the package, throttle bodies and all that fun stuff? or what bits make it up?
i know a bit more about what I need if I was going with carbs, i.e. the ecu, the 45 webers, the trumpets, wiring, gasket and inlet and exhaust
manifolds but dont know anything about what I need for throttle bodies.
any knowledge on this appreciated!
thanks,
[Edited on 31/3/08 by jimbona2]
|
|
|
scotty g
|
posted on 31/3/08 at 06:00 PM |
|
|
Raceline.
Dunnels.
Burton Power.
|
|
Werner Van Loock
|
posted on 31/3/08 at 06:18 PM |
|
|
Jenvey throttle bodies if the pocket allows otherwise some R1 or GSX-R bike throttle bodies
A fuel&spark ECU, and again if the pocket allows a Weber alpha, dta, emerald, omex otherwise the common megasquirt or VEMS.
High pressure fuel pump with appropriate fuel filter, fuel return line, depending on throttle body setup a injection compatible fuel pressure
regulator
And depending on your fuel tank maybe a swirltank (to avoid surges)
That's about it i think, other then carbs that is.
http://www.clubstylus.be
|
|
cossiebri
|
posted on 31/3/08 at 06:19 PM |
|
|
Emerald sell a complete package
Linky
Not locost though !
[Edited on 31/3/08 by cossiebri]
If it doesn't fit MODIFY it!!
Cheers BriF
|
|
rusty nuts
|
posted on 31/3/08 at 07:10 PM |
|
|
Got my throttle bodies from Ely bike breakers for £65.00 , made the manifold myself although I had to pay someone to weld the ally , total less than
£60. Respacing the throttle bodies was easy enough. High pressure pump, swirl pot , extra fuel line about £100 . Emerald ECU was a christmas present ,
sensors about £40 and a 36 tooth wheel £30 although as you have a Zetec flywheel and possibly crank sensor you shouldn't need that . Rolling
road cost £275 plus vat but worth every penny. Megasquirt costs less but probably more hassle getting it set up ? Hope this give you some idea of
cost . Not difficult if you do some research..
|
|