Steve Lovelock
|
| posted on 19/5/08 at 03:06 PM |
|
|
XE / Ecotec coil pack wiring
Hello,
I have a ecotec coilpack for my XE and I would like to know if anybody knows how to wire them? I have three wires going to the coilpack, brown,
brown/blue and brown/green. Is it safe to assume that the brown wire goes to 12V and the other two go to the coil driver circuits?
|
|
|
|
|
omega 24 v6
|
| posted on 19/5/08 at 05:05 PM |
|
|
OK looking at the 2litre wiring diagram fo an ecotec omega is as follows
early models and later models the same
pin 1 is black/red to motronic unit
pin 2 is black ign positive
pin 3 is black/yellow to motronic unit
and on an xe engine with wasted spark coil
pin1 brown/red to ign coil module
pin2 black ign positive
pin3 brown/black to ign coil module.
So it looks to me like pin 2 is ign pos and the other two are trigger wires. (your using megasquirt are you not)
If it fries don't blame me
If it looks wrong it probably is wrong.
|
|
|
Steve Lovelock
|
| posted on 19/5/08 at 07:29 PM |
|
|
Great, thanks
|
|
|
