omega 24 v6
|
posted on 15/7/11 at 09:36 PM |
|
|
Firstly a big thanks to Phil for his help.
It looks like the problem was of my own doing. I took the covering off of my loom to find that in the dim and distant past I had actually grounded the
vr -ve to the ecu ground ( externally) this coupled with the incorrect vr polarity was causing the problem. Swapping the vr wiring at the ecu ( which
is what I did and thought would cure it) did actually give it the correct polarity BUT because it was grounded externally ( and I changed the wires
internally) it now meant the vr+ was now grounded ( if you see what i mean).
I still have the induction clacking noise ( going to fit a filter box and filter a some point) but the timing is now advancing as it should and no
acceleration flat spots at all. Great.
Again thanks Phil and everyone else for their help.
If it looks wrong it probably is wrong.
|
|
|
daviep
|
posted on 15/7/11 at 09:59 PM |
|
|
Happy days
Glad you got it sorted.
“A truly great library contains something in it to offend everyone.”
|
|