Snuggs
|
posted on 20/4/09 at 09:37 PM |
|
|
MS won't read JAW output
Connected JAW Vout2 to MS but not getting any reading on the AFR gauge.
JAW set to emulate LC1
Configurator set to LC1 in settings.ini
EGO set to Single Wideband
Voltage from JAW changes when tested with butane on the lambda sensor.
Gauge works OK using the Stimulator.
Am I missing something obvious or just being stupid ?
Clive
----------------------------------------------------------------------------------------------------
http://www.topcashback.co.uk/ref/snuggstcb
Spider pig, spider pig, does whatever a spider pig does.
I doubt therefore I may be.
Luposlipophobia : Fear of being chased by wolves around a freshly waxed kitchen floor, while wearing only socks on your feet.
My mind not only wanders, sometimes it leaves completely!
http://www.venganza.org
http://www.jesusandmo.net/
http://www.snuggs.co.uk
|
|
|
RichardK
|
posted on 20/4/09 at 09:43 PM |
|
|
Think Tim Windmill nearly got his working, maybe worth a u2u?
Cheers
Rich
Gallery updated 11/01/2011
|
|
tim windmill
|
posted on 22/4/09 at 11:21 AM |
|
|
Snuggs have you got a wire connecting either your Vout1 or Vout2 on your JAW pcb board to your megasquirt O2 signal wire on your db9 connector
|
|
Snuggs
|
posted on 22/4/09 at 11:48 AM |
|
|
Hi Tim,
Vout2 is connected to pin 23 on the DB37 connector.
I have been trawling the net for more info on this and I believe I need to change some settings in the ENRICHMENT menu but I cant figure out where
this menu is
Voltage out of JAW checks out OK using a multimeter.
Clive
----------------------------------------------------------------------------------------------------
http://www.topcashback.co.uk/ref/snuggstcb
Spider pig, spider pig, does whatever a spider pig does.
I doubt therefore I may be.
Luposlipophobia : Fear of being chased by wolves around a freshly waxed kitchen floor, while wearing only socks on your feet.
My mind not only wanders, sometimes it leaves completely!
http://www.venganza.org
http://www.jesusandmo.net/
http://www.snuggs.co.uk
|
|