myeates
|
| posted on 16/8/09 at 06:29 PM |
|
|
Megasquirt help needed
Hi all I have finally got my megasquirt all wired up an ready for tuning but I have no idea where to start megatune seems very hard to understand and
can't seem to make any sense of the instructions they seem like there not for the right bit of software
anyone got any recomendations to help me get started or can recommend a different bit of software
My engine is a 1.3 crossflow with gpz throttle bodies and 1.4 vw polo injectors (anybody know the flow rate?)
thanks in advance
regards
Mark
|
|
|
|
|
Metal Hippy
|
| posted on 16/8/09 at 06:41 PM |
|
|
Howdy.
I suggest you have a wander into here:
http://www.msextra.com/
Very useful place.
Cock off or cock on. You choose.
|
|
|
jonesier1
|
| posted on 16/8/09 at 07:47 PM |
|
|
Hope you have more luck than me and plenty of patience 
im in my own little world...its ok though they know me there
|
|
|
myeates
|
| posted on 16/8/09 at 07:51 PM |
|
|
Patience running out. Even the software seems to complicated but need it running now
|
|
|
omega0684
|
| posted on 16/8/09 at 09:10 PM |
|
|
r u running MS-1 or MS-2?
you have to find out what the flow rate of the injectors are as you will need to input the values into the basic constants page to get the req fuel
values.
make sure you read the MS Manual on extraefi.co.uk have a good read threw
u2u me if your still struggling
best of luck
Alex
|
|
|
myeates
|
| posted on 16/8/09 at 09:24 PM |
|
|
It's ms 2 will read that manual have been using the one on the megasquirt site but doesn't seem that good seems to not give the info for
the upto date software
thanks may be u2uing you thanks
|
|
|
RobLyon
|
| posted on 26/8/09 at 10:48 AM |
|
|
Tuner studio seems to have a more logical layout and has less revisions so the manual is more likely to be up to date etc
HTH,
Rob
|
|
|
