coozer
|
posted on 20/12/09 at 11:30 AM |
|
|
Pump & Filter Mounting?
I am making a ali shelf to down on the bottom chassis rail next to the tank.
I need some brackets/clips to mount the pump and filter. I was thinking of using silicone hose and home made ali clips.
Is there anywhere I can view/buy ready made items?
Steve
1972 V8 Jago
1980 Z750
|
|
|
02GF74
|
posted on 20/12/09 at 11:34 AM |
|
|
pump would usually use little bobbins:
*
filters are usually small and light (plastic) so as justr connected and held up by the hose.
* I made my own by welding up penny washer to bolts and using PU stuff in between.
[Edited on 20/12/09 by 02GF74]
|
|
scutter
|
posted on 20/12/09 at 11:45 AM |
|
|
There is this for an Opel manta.
I quite like it, may have to uprate mine in the new year.
ATB Dan.
The less I worked, the more i liked it.
|
|
coozer
|
posted on 20/12/09 at 11:54 AM |
|
|
This is what I have ATM...
1972 V8 Jago
1980 Z750
|
|
scudderfish
|
posted on 20/12/09 at 12:19 PM |
|
|
Where did you get that filter?
I've got the same pump and used the clamp for a coil to mount it.
|
|
speedyxjs
|
posted on 20/12/09 at 12:26 PM |
|
|
quote: Originally posted by scudderfish
Where did you get that filter?
I've got the same pump and used the clamp for a coil to mount it.
Same as what i have done!
How long can i resist the temptation to drop a V8 in?
|
|
sebastiaan
|
posted on 20/12/09 at 12:32 PM |
|
|
I used large P clips (rubber lined) to clip the pump to the chassis. Works a treat and saves some weight (says he with ye 'olde Pinto ;-))
|
|
turbodisplay
|
posted on 20/12/09 at 12:40 PM |
|
|
I used jubilee clips, with filter wrapped in rubber.
Darren
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
coozer
|
posted on 20/12/09 at 12:58 PM |
|
|
quote: Originally posted by scudderfish
Where did you get that filter?
I've got the same pump and used the clamp for a coil to mount it.
Filter is from Halfords for a efi Vauxhaul. Specified for Senators, Cavs and Corsas.
1972 V8 Jago
1980 Z750
|
|
L5W
|
posted on 20/12/09 at 02:20 PM |
|
|
I think I have the same fuel pump. I used a pipe clamp I found at work, its just the right size and has a rubber sleeve. I can probably
"locate" one or two more clamps if you want one
fuel pump and clamp
I tried the rubber mounts but the ones I bought from RS seemed a bit too soft so had some ali spacers made up instead. Not mounted my fuel filter yet,
I found one on ebay with 12mm in/outlets which comes with its own bracket.
link
http://l5w-mk-indy-zetec.blogspot.com/
|
|
mark chandler
|
posted on 20/12/09 at 03:18 PM |
|
|
Same pump for me, I used the clamp from an old HT coil and sleeved the pump with rubber from an old inner tube.
|
|
scutter
|
posted on 20/12/09 at 04:12 PM |
|
|
Lee, your mount looks like the exhaust clamps you used to get on old Vw's, just an idea for those looking for one.
Here is one on ebay.
ATB Dan.
[Edited on 20/12/09 by scutter]
The less I worked, the more i liked it.
|
|
paulf
|
posted on 20/12/09 at 07:28 PM |
|
|
I also used the same method, its been on there for 3 years and haven't been near it since fitting.
Paul.
quote: Originally posted by mark chandler
Same pump for me, I used the clamp from an old HT coil and sleeved the pump with rubber from an old inner tube.
|
|
twinturbo
|
posted on 21/12/09 at 01:00 PM |
|
|
I haev a very simialr blue pump £23 of ebay.. It was goihn in the MK1 golf but I have boutght a POLO GT setup for that..
So I now have a pump for the HR build
TT
|
|