Dave Bailey
|
| posted on 12/7/10 at 08:38 PM |
|
|
Jenvey Air Box
I have a set of Jenvey throttle bodies on my Zetec and I am at the stage of sorting out the airbox... I was trying to avoid cutting the bonnet but I
think sapce is so tight I will have to. I would like a carbon airbox not very locost I know but if the price was right and all that.... Anyone got any
advice?
thanks
Dave Bailey.
|
|
|
|
|
jeffw
|
| posted on 13/7/10 at 05:22 AM |
|
|
I've used a Pipercross Airbox in the Phoenix on Zetec/Jenveys. Works well but is expensive.
http://www.pipercross.net/competition/products_600_airbox.asp
|
|
|
omega0684
|
| posted on 13/7/10 at 07:40 AM |
|
|
What size trumpets are you running? if you are running anything more than 10 mm the box will be pointless. Again depends on spec of the engine would
it not be better to have the trumpets exposed to cold air.
I love Pinto's, even if i did get mine from P&O!
|
|
|
Dave Bailey
|
| posted on 13/7/10 at 06:51 PM |
|
|
Hi I have 90mm trumpets...
|
|
|
Dave Bailey
|
| posted on 13/7/10 at 07:42 PM |
|
|
Looks like I might have to reduce the trumpet lengths to prevent from having to cut the bonnet.... Currently 90mm but I could do with reducing them to
50mm... Any advice as to how this will effect performance?
thanks
Dave B
|
|
|
jeffw
|
| posted on 13/7/10 at 07:59 PM |
|
|
I have 45mm trumpets inside the Piper box.
|
|
|
