Jon Hazan
|
| posted on 16/11/11 at 03:31 PM |
|
|
CVH exhaust manifold
Im looking for an exhaust manifold plate or exhaust manifold and pipes to fit a 1.8 Ford CVH.
Ive got the silencer / cat but looking for pretty much everything in between! Also got a 4 into 1 if I need.
A perfect solution would be a manifold that drops the 4 pipes out the left side and runs back as far as the dash.
|
|
|
|
|
Bluemoon
|
| posted on 16/11/11 at 04:54 PM |
|
|
Cut Westfield 1.6CVH down pipe?
|
|
|
Jon Hazan
|
| posted on 17/11/11 at 01:57 PM |
|
|
Could you u2u me a pic?
|
|
|
tims31
|
| posted on 17/11/11 at 02:29 PM |
|
|
I've got one I don't need, drop me a U2U
Oops, just checked - it's a CVH inlet manifold - sorry to get your hopes up. The exhaust manifold is a Zetec one.
Apologies
[Edited on 17/11/11 by tims31]
Build: http://www.martinsfurybuild.co.uk/
|
|
|
Bluemoon
|
| posted on 18/11/11 at 09:33 AM |
|
|
I have no photos (I don't have the down pipe), there are some photos on here, or maybe in the westfield on-line shop?
|
|
|
sevaun
|
| posted on 21/11/11 at 08:08 AM |
|
|
Exhaust manifold
Hi
I have an Ashley tubular steel manifold for a 1.6CVH(XR2/3)
This has been modified for rear wheel drive use in my locost. Not sure if it will fit the 1.8 engine, but will post photos tonight when I get in if
you're interested.
Richard
|
|
|
sevaun
|
| posted on 23/11/11 at 08:22 AM |
|
|
Have you found one yet?
It would be handy if the original poster would post as to whether he has found an the part he's looking for - would save me and others who have
replied from having to check back every day for any replies.
Thanks
Richard
|
|
|
Jon Hazan
|
| posted on 24/11/11 at 11:04 AM |
|
|
Hi Richard,
Sorry I missed your reply, I did not find what I was looking for.
I have ended up taking the car to a local custom exhaust shop to make sure I get a manifold that fits the car. From what i've read the 1.6 is
identical to 1.8.
Thanks,
Jon
|
|
|
sevaun
|
| posted on 24/11/11 at 12:38 PM |
|
|
quote:
Originally posted by Jon Hazan
Hi Richard,
Sorry I missed your reply, I did not find what I was looking for.
I have ended up taking the car to a local custom exhaust shop to make sure I get a manifold that fits the car. From what i've read the 1.6 is
identical to 1.8.
Thanks,
Jon
OK Jon, no problem glad you got sorted.
Richard
|
|
|
