richardh
|
| posted on 15/7/12 at 04:14 PM |
|
|
need help identifying these bits
Hi, RV8 manifold with 38DGAS but i cant identify what these connect to or if i blank them off
bit on manifold and black bit at base of weber
[Edited on 15/7/12 by richardh]
[Edited on 15/7/12 by richardh]
Time for a change!
|
|
|
|
|
jacko
|
| posted on 15/7/12 at 05:45 PM |
|
|
The black pipe at the base is a vacuum pipe think its for a dizzy vacuum
|
|
|
richardh
|
| posted on 15/7/12 at 05:53 PM |
|
|
oops, my dizzy one is the smaller brownish one at the left and goes from dizzy to manifold on far side
i've got my flow/return pipework on ok, fuel in, brather from manifold to brake servo
the silver bit on manifold i'm thinking is another tap for a water supply to something else ???
black one might be for an additional breather pipe ?
Time for a change!
|
|
|
mookaloid
|
| posted on 15/7/12 at 06:42 PM |
|
|
Black bit looks like crank case breather connection to me.
silver one on manifold looks like water cooling to me
"That thing you're thinking - it wont be that."
|
|
|
deltron63
|
| posted on 15/7/12 at 08:30 PM |
|
|
The breather on your rocker covers go to the black one. The silver one should be for the water temp sender, but it looks like it's been
converted to a water outlet pipe
|
|
|
richardh
|
| posted on 16/7/12 at 06:55 AM |
|
|
Thanks folks
Time for a change!
|
|
|
jacko
|
| posted on 16/7/12 at 08:05 PM |
|
|
Sorry i got it wrong i was trying to remember when i had a ford v6 
Jacko
|
|
|
