big-vee-twin
|
| posted on 17/4/13 at 04:30 PM |
|
|
IAT thread size
I have got a GM style IAT for the MS, not exactly sure of the make.
I need to ID the thread size.
Thinking it is a NPT thread but not sure- it measures 13mm od on the vernier.
Can anybody help please?
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
|
|
ReMan
|
| posted on 17/4/13 at 07:22 PM |
|
|
Cant help, but reading this as I read STUFF at work, your TLA count was very good! 
GM IAT MS ID NPT OD
www.plusnine.co.uk
|
|
|
big-vee-twin
|
| posted on 17/4/13 at 07:30 PM |
|
|
There are only two TLA's
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
ReMan
|
| posted on 17/4/13 at 08:02 PM |
|
|
quote:
Originally posted by big-vee-twin
There are only two TLA's
OK T/TLA acronyms
www.plusnine.co.uk
|
|
|
theprisioner
|
| posted on 17/4/13 at 08:13 PM |
|
|
I thought I was the only person not understanding all these acronyms. Anyway 1/4 NPT is identified by a OD 13.72mm and a thread of 18TPI. If you tell
me yours I will tell you mine!!!
|
|
|
scudderfish
|
| posted on 17/4/13 at 08:15 PM |
|
|
quote:
Originally posted by ReMan
quote:
Originally posted by big-vee-twin
There are only two TLA's
OK T/TLA acronyms
But that's redundant, like PIN number 
|
|
|
Valtra
|
 posted on 21/4/13 at 10:34 PM |
|
|
3/8" NPT
"If it looks like it works and it feels like it works, then it works"
|
|
|
