madteg
|
| posted on 17/5/13 at 10:16 PM |
|
|
Rolling road results
Had car done at Advanced Motorsport at Silverstone today, very nice chap who knows megasquirt inside out. I thought i had made a good starting point
to my maps. Was i wrong, car was done in a wind tunnel and hubs bolted straight to the rolling road, after 1 1/2 hours at £95 per hour i ended up with
233BHP at the wheels and 276 ft pounds of torque.
Have not drove the car yet but looking forward to having a go tomorrow.
[img] [/img]
[Edited on 17/5/13 by madteg]
|
|
|
|
|
snapper
|
| posted on 18/5/13 at 06:18 AM |
|
|
That's some nice torque
Should be swift
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
matt_gsxr
|
| posted on 18/5/13 at 07:45 AM |
|
|
Out of interest, what boost level is that at?
|
|
|
40inches
|
| posted on 18/5/13 at 09:26 AM |
|
|
"hubs bolted straight to the rolling road"
Couldn't figure that out, until I looked at the website, not seen that method before.
|
|
|
DRC INDY 7
|
| posted on 18/5/13 at 07:18 PM |
|
|
Do you have a boost print out and a afr print out and also what duty percentage are you injectors running at plus injector size
https://www.facebook.com/groups/462610273778799/
Puddle Dodgers Club
|
|
|
madteg
|
| posted on 18/5/13 at 07:41 PM |
|
|
440cc injectors with 1.1bar of boost, had trackday today and it dont half go.
|
|
|
