clairetoo
|
| posted on 13/5/14 at 02:01 PM |
|
|
Omex 710
Looks like I have just bought a second-hand Omex 710 - anyone here with experience of these ?
Its cuz I is blond , innit
Claire xx
Will weld for food......
|
|
|
|
|
jeffw
|
| posted on 13/5/14 at 02:13 PM |
|
|
Nice top end ECU....has many more features than the common as muck 600. Well done.
|
|
|
wylliezx9r
|
| posted on 13/5/14 at 02:35 PM |
|
|
I'm using one on my F20C S2000 engine, mainly because of the sequential fuel injection and vtec control. Runs the engine lovely and I have
received excellent support from Omex. Another advantage of using Omex is that they don't license the software to certain rolling roads, so you
can go anywhere for mapping.
I spent a lot of money on booze, birds and fast cars. The rest I just squandered.
George Best
|
|
|
clairetoo
|
| posted on 13/5/14 at 04:19 PM |
|
|
My first experience of DIY engine management was with an Omex 400 - way back on a wild crossflow - and I found it very easy to set up and map .
What got my attention about this 710 ( from a quick read on the Omex site ) was full sequential injection and fueling - would this need a cam angle
sensor ?
I do remember the 400 having `programmable idle stabilization' - it allowed the crossflow to pull all the way to fifth gear without touching the
throttle - I'm guessing the higher spec ECU will have something similar as well ?
Its cuz I is blond , innit
Claire xx
Will weld for food......
|
|
|
