ian.stewart
|
| posted on 25/6/18 at 02:30 PM |
|
|
Rolling Roads in East Sussex/WestKent
At the moment, It looks like I will be running a Emerald K6 ecu in my car, its got a base map, but will need setting up, obviously I would like to get
it on a set of rollers with a competent operator who is capable of dialing in my car, any suggestions in the East Sussex/West Kent Area.....
Something different, Very different..............
|
|
|
|
|
peter030371
|
| posted on 25/6/18 at 02:42 PM |
|
|
I live in the same area but ended up going to AT Speed in Rayleigh as they have such good reviews/ recommendations. They did a great job and it was
worth the extra distance IMHO.
|
|
|
boggybogstar
|
| posted on 25/6/18 at 07:33 PM |
|
|
I’m in Uckfield and used AT speed too for my old Emerald as I couldn’t find anyone local - can highly recommend them although they do command a high
price!
I know a few folk who have used HT racing and been really happy with their results, located up at Brands Hatch
http://www.dyno-solutions.co.uk/
|
|
|
peter030371
|
| posted on 26/6/18 at 07:43 AM |
|
|
I did consider HT but I have an Omex and couldn't find any reviews on there Omex tuning. They do advertise Emerald though so they could be good
for that 
|
|
|
jeffw
|
| posted on 26/6/18 at 10:51 AM |
|
|
Take it to Atspeed, you'll get a proper map and it will work from cold & off throttle not just when you are flat out.
|
|
|
ian.stewart
|
| posted on 29/6/18 at 06:41 AM |
|
|
Sanspeed in Bexleyheath has come with good recommendations too, good value, and very knowledgeable
Something different, Very different..............
|
|
|
SylvaJ15-02
|
| posted on 31/10/18 at 11:42 AM |
|
|
I used Abbey Motorsport in Oxted for my J15 with the Emerald K6 - seemed fine
|
|
|
