liam.mccaffrey
|
| posted on 22/5/06 at 07:27 PM |
|
|
Full bodied westfield
does anyone know of any pictures showing this westy body from different angles (or any pis at all for that matter)
any help would be appreciated
 
red westfield full body
 
yellow westfield full body
Build Blog
Build Photo Album
|
|
|
|
|
pathfinder
|
| posted on 22/5/06 at 07:49 PM |
|
|
Cant help with the photos I’m afraid, but the red one has been on eBay a couple of times in the last year, think it was a prototype or a one off,
Vauxhall engine in it if I remember correctly. Anyway it looks loads better from the front than that yellow one!
Are you planning a purchase?
|
|
|
the_fbi
|
| posted on 22/5/06 at 08:23 PM |
|
|
Yip was definately on ebay last year. I don't recall it ever getting above £5k either.
Was an SBD 208 XE engine too from memory.
Nice looking motor.
|
|
|
Guinness
|
| posted on 22/5/06 at 08:44 PM |
|
|
pretty sure that belongs to a member on here now, or it did, "7 in a fancy suit" i think.
But nothing much in his photo archive and doesn't look like he's been on in a while.
Last active: 24/2/06 at 02:37 PM
HTH
Mike
|
|
|
whpracer
|
| posted on 22/5/06 at 08:46 PM |
|
|
found some pictures
cheers
 
Rescued attachment 23489-1.jpg
|
|
|
whpracer
|
| posted on 22/5/06 at 08:48 PM |
|
|
and another one
 
Rescued attachment 23489-2.jpg
|
|
|
perksy
|
| posted on 22/5/06 at 09:31 PM |
|
|
Think the Red one now lives in Ireland and was going to be used for a Hillclimb Championship.
It used to belong to a member on the WSCC Boardroom but i think He found it a bit of a handful for road use 
|
|
|
procomp
|
| posted on 23/5/06 at 08:06 AM |
|
|
Hi this car now belongs to 7 in a fancy suit indeed a member on here the car was origanally a prototype built by westfield and raced for a short time
in the 750mc by jack dalmas and then sold to tom laffey who used it for a short time the moulds where brought by us procomp . The car was then sold by
tom to some one in scotland and after a lack of time to do anything with the moulds were also sold by us to the same person i belive. After that it
seemd to disapear for the next 10-15 years but then turned upagain with the vx fitted as it origially had a xflow. It changed hands a few times and
then ended up with it's present owner in ireland and the moulds now back with us procomp . The plan is to use the moulds to produce a new body
for our new car in 2007 altho will be quite different to what it is now. the existing moulds were only ever prototype and are now in need of repair .
The existig body would not fit over a 7 type chassis as it is more of a front engine rearwheel drive mid seated driver whith the engine sat ontop of
the front axle line .
cheers matt
|
|
|
iank
|
| posted on 23/5/06 at 08:24 AM |
|
|
As said look for his posts for more pictures.
e.g. http://www.locostbuilders.co.uk/viewthread.php?tid=37241
|
|
|
liam.mccaffrey
|
| posted on 23/5/06 at 03:48 PM |
|
|
thanks guys really appreciate the efforts
have quite a few piccies now
Build Blog
Build Photo Album
|
|
|
