jon_boy
|
| posted on 2/11/06 at 03:00 PM |
|
|
Clifford concept 650
At work (at a garage) we had a part ex come in with said alarm on that was going to be traded for a couple of hundred, so i had the alarm out. Its all
in working order but basically i could do with the wiring diagram to get it into my car. Any help would be appreciated. Jon
|
|
|
|
|
scoey m
|
| posted on 2/11/06 at 07:41 PM |
|
|
Hi mate
Had a clifford in my old tin top and most wires are black so unless installed from new with indicating tags i think you will struggle highly 
Thats why there so expensive to install and buy 
Only help i can give sorry
|
|
|
quadra
|
| posted on 2/11/06 at 08:14 PM |
|
|
You could try asking at www.the12volt.com under the car alarms bit. I did for a clifford immobilser and it worked. Owners guides can be found at
www.clifford.com/guides/other
Hope that helps.
Cheers Mike
You don't need eyes to see, you need vision!
|
|
|
jon_boy
|
| posted on 2/11/06 at 11:19 PM |
|
|
Right. After some gueswork and two fuses i have it basically going. Just want to be fancy and wire it up so i can start my car from indoors etc. Tried
the clifford site and it only goes up to the 600 series. but thanks for the replies people!!
|
|
|
jon_boy
|
| posted on 3/11/06 at 10:30 AM |
|
|
And we have lift off. If anyone ever needs help with one....
|
|
|
