3GEComponents
|
posted on 25/1/07 at 03:38 PM |
|
|
Caliper position.
Not sure if this has been asked before, but does the position of the caliper have an effect on the suspension?
eg, if it was mounted at 3 o'clock would it compress the suspension where as if it was at 9 o'clock whould it extend the suspension? or
visa versa.
Thanks
John
|
|
|
MikeR
|
posted on 25/1/07 at 03:53 PM |
|
|
none technical response would be none - assuming identical positioning apart from 3 or 9 o'clock as it gains / looses no additional momentum.
Issue would be easy of bleeding / amount of cooling from air rushing past / is it sided - ie this end has to be 'up' for any particular
reason.
|
|
Bananaman
|
posted on 25/1/07 at 09:36 PM |
|
|
What sort of rear axle set up are you running?
|
|
britishtrident
|
posted on 27/1/07 at 10:31 AM |
|
|
It as an effect BUT only on the wheel bearing loads.
|
|