graememk
|
| posted on 23/4/08 at 08:43 PM |
|
|
bearing wanted
not sure how to explain this, my steering has an extra uj and it has a rubber bearing in a metal plate, its perrished and i want to replace it with a
bearing that i can bolt to a flat plate must be 15mm can anyone help me ?
|
|
|
|
|
owelly
|
| posted on 23/4/08 at 08:44 PM |
|
|
BSL Brammer can help you!!
http://www.ppcmag.co.uk
|
|
|
owelly
|
| posted on 23/4/08 at 08:44 PM |
|
|
BSL Brammer can help you!!
http://www.ppcmag.co.uk
|
|
|
graememk
|
| posted on 23/4/08 at 08:45 PM |
|
|
quote:
Originally posted by owelly
BSL Brammer can help you!!
who, is it a person or a company ?
|
|
|
owelly
|
| posted on 23/4/08 at 08:49 PM |
|
|
It's a company. You can google them but the webby isn't much good for finding things! There's a guy one here who works for them but
I forget his (and my) name!
http://www.ppcmag.co.uk
|
|
|
owelly
|
| posted on 23/4/08 at 08:59 PM |
|
|
http://www.bsl.co.uk/home.shtml
http://www.ppcmag.co.uk
|
|
|
big_wasa
|
| posted on 23/4/08 at 09:43 PM |
|
|
Do you mean this bit ?
 
|
|
|
graememk
|
| posted on 23/4/08 at 09:49 PM |
|
|
nope.
the shaft goes through a plate which has a rubber sleave acting as a bearing but its split, i want to replace it with a rose joint style bearing that
will bolt to a flat plate insted of a threded bar
|
|
|
daviep
|
| posted on 23/4/08 at 10:05 PM |
|
|
Something like
THIS?
|
|
|
daviep
|
| posted on 23/4/08 at 10:09 PM |
|
|
Or possibly
THIS?
|
|
|
graememk
|
| posted on 23/4/08 at 10:12 PM |
|
|
quote:
Originally posted by daviep
Or possibly
THIS?
thats the kiddy "daviep" but the center must be able to pivit like a rose bearing as the plate it fastends to is at 90degs and the
steering shaft comes through at an angle.
|
|
|
GazzaP
|
| posted on 24/4/08 at 07:55 AM |
|
|
Hiya
I work for Brammer! The bearing that is above my post is identified as a self lube bearing. I run one of these where the steering coloumn goes
through the bulke head just above the pedal box on a slight angle and it work's great and gives the shaft more stability. I'll try and
get a photo loaded today at some point as i'm on holiday this week. There are avarious different qualities of bearing the one shown above is a
japanese item which are ok! the best are the RHP/NSK items.
regards
Gary
www.gmpmotorsport.co.uk
|
|
|
rusty nuts
|
| posted on 24/4/08 at 05:41 PM |
|
|
IIRC I have seen a post showing how to install the type of bearing you want. If it wasn't here it may have been on the Robin Hood owners site?
It may have given the part number and supplier of the bearing if it helps.
|
|
|
eccsmk
|
| posted on 24/4/08 at 06:44 PM |
|
|
you could try imperial bearings in boston
think they are nex door to H&L on marsh lane
|
|
|
.jpg)
