U2U | Member List | Search | Photo Archive | Chat | Links | Shop
Not logged in [Login - Register]
LocostBuilders » Forum » Fuel injection / EFI » No spark on 2/3 - unsure of wiring to VB37 (MSnSE) MIG Welders & ARC Welders at MachineMart.co.uk   go to bottom
Printable Version | Subscribe | Add to Favourites
 New Topic New Poll New Reply
Author: Subject: No spark on 2/3 - unsure of wiring to VB37 (MSnSE)
Steve Lovelock
Contributor






Posts 733
Registered 11/5/04
Location Sunny North London
Member Is Offline

Photo Archive Go!
Building: Excuses for not working on the Healey 100
posted on 25/5/08 at 10:38 AM Reply With Quote
No spark on 2/3 - unsure of wiring to VB37 (MSnSE)

I have no spark on plugs 2/3 and am unsure of the wiring of my MSnSE board.

I have followed the plans and wired my second VB921 to:

Bottom of link wire that has replaced R43
Top of R29 via 330R in proto area
To SPR4 then a wire from that to pin 6

I am using a relay board and note that pin 6 is connected to ground at the relay board.

Have I got this correct?

Regards
Steve
View User's Profile View All Posts By User U2U Member
Steve Lovelock
Contributor






Posts 733
Registered 11/5/04
Location Sunny North London
Member Is Offline

Photo Archive Go!
Building: Excuses for not working on the Healey 100
posted on 25/5/08 at 12:11 PM Reply With Quote
Solved the problem, had the relay board wired incorrectly, donut.
View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


 LocostBuilders » Forum » Fuel injection / EFI » No spark on 2/3 - unsure of wiring to VB37 (MSnSE) go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.