Hi been reading through the posts, im going to remotely my oil pressure sender (etb 1/8 npt) unit from the oil cooler bolt............ 2 questions

1. do i drill the oil cooler bolt to 1/8 npt?

2. where do i get the braded hose from? (cant seem to find female 1/8 npt fittings)

Adrian

I got mine from Think Auto - I've found them really helpful although I've heard others on here have had not such good experiences.

Wyn

thanks ,

do i get hole drilled to 1/8 npt on bolt?

Depends on what end you get on the hose! I think I drilled and tapped mine to 1/8 npt

For pressure take off technical guide linky here

Thats my old motor in the pics. And the parts list although I didnt bother with a T off the oil cooler bolt for temp but instead mounted the temp sender in the sump.
- Jim

Thanks guys!

Adrian

I copied Jim!

Pictures on my site here - follow the links to Engine/ECU

Regards

Wyn

Stuart @ LMA LINK
made remote sensor hose up for me. Very helpful - said he supplies sensors and adaptors to ETB.