hi all

i've a MK indy , but i don't know how to mount/fix the MK GRp seats.
I want them as far back as possible.

any tips, ?


thanks koen
www.zx12r-indy.tk

I made a couple of brackets for mine out of plate. 3mm aluminium would do it. You could profile them or drill them to lighten them if you want. A basic sketch not to scale or anything just to give an idea. I used button head stainless bolts to fasten through the seat with a washer to spread the load.

[Edited on 23/1/05 by Peteff]
Rescued attachment bracket.jpg

I used stainless box section with threads tapped into one side which you screw bolts into from below the floor, and for the seats drilled a 8mm hole all the way through, and then opened up the top one to 12mm so a scoket head bolt can pass through and then into the base of the seat

Again, 3mm ally.
Rescued attachment ally_seat_mount.jpg

How come you guys seem to be able to use side mounts? My MK seats came with the nuts moulded into the base.

make up a bracket to fit the seat base

eg

| |
|_________________|