ETDWM
Linky

May I ask what upgrade you've done with the cams??

were actually going for full race crane cams. Power band 3.5k to 8k, hence the wet sump is being replced with a dry sump as well.

Is the flywheel a standard cast one lightened or a pupose made steel one? What clutch is it drilled for?

[Edited on 14/5/09 by smac]

billet steel item drilled for the standard 7" clutch used to mate fords to a type 9, will throw in the clutch as well, not showing any signs of excessive wear but we are going to be using a tilton 5 1/4"

HTH
Mac

How much lighter is the flywheel? Is it 1.8 or 2 litre size? If itl take a standard mundano clutch i may be interested,

Have you got as piccie of that oil gauge aswell please.

[Edited on 15/5/09 by Danozeman]

the Tiger flywheel is approx 5 to 5.5kg and the original is approx 10kg, its was fitted to a 2.0 litre but fairly sure it wiould do a 1.8 litre as well

The gauge is gone im afraid

Mac

oil pressure gauge and flywheel sold

You have a U2U.