Board logo

BREAKING LOCOST SEVEN
Panda - 28/5/14 at 01:00 PM

The time has come to break the seven its been sat untaxed and tested for 5 years and aside from a run up and down the lane from time to time its not done anything.

Prices will come as I do research into current values but there are some quite hard to find parts on it, they were tricky at the time.

The decision has been made to break as we don't want to see it complete as it was in other hands but hope parts can go on to build new sevens. Please don not insult me with low ball offers as I'm in no rush to sell parts.

The car was built in 1999 and it has only ever been owned by me. I will get pictures on sunday when we get it out from storage and begin to break.

Parts of note that I can think of from the top of my head are.


- Toyota 4-age Phase 3 Engine low miles since rebuild.
- Full throttle body set up with inlet manifold to suit above engine.
- 4-age rwd seven fitment stainless manifold
- Large stainless silencer easily passes motorsport/trackday regs
- Megasquirt V1
- Wilwood 4 Pot M16 Set Up
- Bias bar pedal box
- Cortina Uprights
- RS2000 mk2 escort 9" drum rear axle with quaiffe ATB diff
- Toyota T50 Gearbox reconned less than 200 miles ago
- caterfield type frp seats
- caterham screen
- book correct wings and prelit type scuttle
- perfect dimension nose cone
- rose jointed book front wishbones
- gaz coilovers
- recored cortina rad with performance core
- all the other usual associated parts

Car is located in DN10


MP3C - 28/5/14 at 01:17 PM

Couldn't get a pic of the exhaust silencer could you?

Matt


daveb666 - 28/5/14 at 01:19 PM

Price on the will wood setup please?

Can collect


Panda - 28/5/14 at 02:28 PM

quote:
Originally posted by MP3C
Couldn't get a pic of the exhaust silencer could you?

Matt


I will get one at the weekend.


Panda - 28/5/14 at 02:30 PM

quote:
Originally posted by daveb666
Price on the will wood setup please?

Can collect


£350

To include;
Pair of 4 pot calipers
Mounts
Discs
Pads (two sets hawk and some road pads)
Braided hoses


daveb666 - 28/5/14 at 03:15 PM

are they dynalites or midilites?

How much use (if any) ?


peter bland - 28/5/14 at 03:15 PM

You have u2u.


Panda - 28/5/14 at 03:56 PM

quote:
Originally posted by daveb666
are they dynalites or midilites?

How much use (if any) ?


I can find out tomorrow name escapes me.

Miles approx 200miles on them. 30 of which hillclimbs sprints


mcerd1 - 28/5/14 at 03:56 PM

any pic's of the seats ?


Panda - 28/5/14 at 03:57 PM

All pics on sunday as it is currently in storage under about 7 covers


Panda - 28/5/14 at 03:57 PM

quote:
Originally posted by peter bland
You have u2u.


replied


The Knobs - 28/5/14 at 04:04 PM

u2u re Gaz


Jon Ison - 28/5/14 at 04:11 PM

What wheels/tyres is is sat on ?


daveb666 - 28/5/14 at 04:54 PM

Thanks for the brakes info but too expensive for me compared with the new rrp.

Thanks.


ashg - 28/5/14 at 05:03 PM

how much for the axle?


cb500t - 28/5/14 at 05:43 PM

Interested in headlights..


pekwah1 - 28/5/14 at 06:34 PM

Price for the coilovers and rear axle please!


andygfc - 28/5/14 at 07:04 PM

How much for silencer?


mjb199 - 28/5/14 at 07:11 PM

How much for screen?


Dick Axtell - 28/5/14 at 07:13 PM

Hi Panda. Am interested in your Caterham screen. Hav sent U2U.


cfc999 - 28/5/14 at 07:36 PM

U2U sent regarding your engine and gearbox.
Cheers
Chris


AntonUK - 28/5/14 at 08:07 PM

I'd be interested in the seats. If you can get some photos and dimensions?


paulix - 28/5/14 at 10:38 PM

hi panda, am i the first to ask how much for the whole car??? if you've already sold some of it let us know whats left and we can go from there if that suits you. all the best paulix..


samjc - 28/5/14 at 11:02 PM

Pedal box pictures and prices please.


Panda - 29/5/14 at 11:23 AM

quote:
Originally posted by paulix
hi panda, am i the first to ask how much for the whole car??? if you've already sold some of it let us know whats left and we can go from there if that suits you. all the best paulix..


The car won't be sold whole as we don't want to see it complete in other hands so to speak so decided to break it


Panda - 29/5/14 at 11:33 AM

quote:
Originally posted by daveb666
Thanks for the brakes info but too expensive for me compared with the new rrp.

Thanks.


No probs IIRC they cost us circa £600


Panda - 29/5/14 at 11:34 AM

quote:
Originally posted by samjc
Pedal box pictures and prices please.


Best bet is to come have a nosey we're only 15mins from doncaster


Panda - 29/5/14 at 11:35 AM

quote:
Originally posted by ashg
how much for the axle?


We are looking for offers as we will be putting it to the rally/mk2 forums


waggy - 29/5/14 at 11:33 PM

Panda how much for the chassis and v5?


Panda - 30/5/14 at 07:48 AM

All u2u's replied to i think inbox is crazy


threadbare wallet - 31/5/14 at 08:18 AM

How much for engine and gearbox if not sold please.


JAMSTER - 31/5/14 at 12:34 PM

steering rack???


Panda - 13/6/14 at 11:47 AM

A few pictures we've took so far.



















Only just had good enough weather to get it out of storage.


Panda - 13/6/14 at 11:53 AM

quote:
Originally posted by JAMSTER
steering rack???


Is a mk2 escort quick rack 2.4 lock to lock. £80


Panda - 13/6/14 at 12:04 PM

Some Prices all are not set in stone as we get up to speed all items can be shipped UK MAINLAND;

- Toyota 4-age Phase 3 Engine low miles since rebuild.
- Full throttle body set up with inlet manifold to suit above engine.
- 4-age rwd seven fitment stainless manifold raw motorsport early job all heat wrapped
- Megasquirt V1

Basically a ready to run set up running circa 150bhp With cams and headwork would raise significantly

£2000ono


- Large stainless silencer easily passes motorsport/trackday regs

£100

- Wilwood 4 Pot M16 Set Up
Comprises of calipers, brackets, braided lines, 2 sets of pads road and hawk ones and proper discs 4x108 to fit cortina uprights. Discs will be faced of surface rust.

£350

- Bias bar pedal box

£unkown as yet while we remember spec

- Cortina Uprights
Bearings done less than 3000miles complete

£150

- RS2000 mk2 escort 9" drum rear axle with quaiffe ATB diff 3.89 Ratio
Brackets to suit original book chassis

£600

- Toyota T50 Gearbox reconned less than 200 miles ago
Rough unknown boxes do £300

So £600

- caterfield type frp seats

£offers

- caterham screen
Immaculate chip and scratch free screen both stays and surround.

£120

- book correct wings and prelit type scuttle
- perfect dimension nose cone and rear wings

£will look into this asap

- rose jointed book front wishbones

£175 all four

- Avo (sorry thought were gaz) coilovers
£225 the set come with various different springs we tried over seasons

- recored cortina rad with performance core and fan
£80

- all the other usual associated parts

[Edited on 13/6/14 by Panda]


JAMSTER - 13/6/14 at 12:08 PM

bought one last week thanks anyway


sickbag - 13/6/14 at 12:18 PM

Hi, have the seats and belts been sold yet?


Panda - 13/6/14 at 12:30 PM

quote:
Originally posted by sickbag
Hi, have the seats and belts been sold yet?


Seats and straps available harnesses available are a pair of 2" 3 point short straps


Panda - 13/6/14 at 12:32 PM

more pics













DW100 - 13/6/14 at 01:44 PM

Are the brakes this kit?

http://www.rallydesign.co.uk/product_info.php?cPath=562_563_567&products_id=10507


Panda - 13/6/14 at 01:51 PM

No mate the discs are on seperate bells with bigger calipers this was put together by us moons ago set us back around £6/700, These will fit under a 14 just if its a motorsportesque wheel

[Edited on 13/6/14 by Panda]


sickbag - 13/6/14 at 02:03 PM

The seat belts are the blue ones in the picture? How much for the seats? I need belts for an MK so the top straps have to be seperate unfortunately. Still interested in the seats if the price is right


cb500t - 13/6/14 at 05:16 PM

How much for the headlights?


chris_smith - 13/6/14 at 05:54 PM

what about the chassis and bones?


Panda - 14/6/14 at 02:04 PM

quote:
Originally posted by sickbag
The seat belts are the blue ones in the picture? How much for the seats? I need belts for an MK so the top straps have to be seperate unfortunately. Still interested in the seats if the price is right


£160 on adjustable runners


Panda - 14/6/14 at 02:05 PM

quote:
Originally posted by cb500t
How much for the headlights?


Make me an offer ones been repaired


Panda - 14/6/14 at 02:06 PM

quote:
Originally posted by chris_smith
what about the chassis and bones?


Chassis no v5 trailing arms side panels roll bar £550


cb500t - 14/6/14 at 02:09 PM

quote:
Originally posted by Panda
quote:
Originally posted by cb500t
How much for the headlights?


Make me an offer ones been repaired


Any pics?


Phil_neast - 14/6/14 at 10:01 PM

Hi, could you let me know the width of the seats?

Thanks

Phil.


Panda - 15/6/14 at 06:04 PM

quote:
Originally posted by cb500t
quote:
Originally posted by Panda
quote:
Originally posted by cb500t
How much for the headlights?


Make me an offer ones been repaired


Any pics?


Ill try take some tomorrow


Panda - 15/6/14 at 06:06 PM

quote:
Originally posted by Phil_neast
Hi, could you let me know the width of the seats?

Thanks

Phil.


Base or where you fit?

36" waist fits in and base is narrow enough to fit standard original book chassis


Phil_neast - 15/6/14 at 09:18 PM

It's the width of the seats I'm after. I have an early S7 robinhood, similar to the cater ham chassis and it will only take narrow seats. If you could give me the max width of the seat and the max width of the back that would be great.

Thanks

Phil.


Panda - 16/6/14 at 02:43 PM

Wishbones, screen, wipers and exhaust sold


FERRARIST - 29/7/14 at 08:27 PM

Pedal box price and picture if possible?