Board logo

Best way to remove fuel injectors from fuel rail
Steelman - 23/10/08 at 07:58 AM

I need to remove a fuel injector from the fuel rail which is does not want to come out. Tried soaking overnight in WD40 with no luck, any other suggestions

Mr Whippy - 23/10/08 at 08:06 AM

is their little metal clips?? most seem to have them. Once removed then you just tug or yank on injectors to plop the O-rings past the grove

graememk - 23/10/08 at 10:14 AM

clutch_kick - 23/10/08 at 02:08 PM

I bang them out with a 2lb hammer. It also helps unjam the injector spring inside.

scutter - 23/10/08 at 02:56 PM

quote:
Originally posted by clutch_kick
I bang them out with a 2lb hammer. It also helps unjam the injector spring inside.


And possibly snap them in the rail, remove clip and pull hard.

ATB Dan.

clutch_kick - 23/10/08 at 03:35 PM

quote:
Originally posted by scutter
quote:
Originally posted by clutch_kick
I bang them out with a 2lb hammer. It also helps unjam the injector spring inside.


And possibly snap them in the rail, remove clip and pull hard.

ATB Dan.


You did realise that i was joking. Right? lol

MikeRJ - 23/10/08 at 05:52 PM

quote:
Originally posted by clutch_kickYou did realise that i was joking. Right? lol


I knew you must be joking when you mentioned a 2 pound hammer; that's barely enough to break toffee with