Board logo

fan and fan switch
Slater - 13/11/08 at 02:41 PM

Hello

What order should I wire these up?

A - 12V Feed, Fan, Fan Switch, Earth

or

B - 12 V Feed, Fan Switch, Fan , Earth


Mr Whippy - 13/11/08 at 02:43 PM

B but both work the same

not another thing going to work today? your going to be well plastered at this rate...



[Edited on 13/11/08 by Mr Whippy]


BenB - 13/11/08 at 02:48 PM

Yup. It makes no difference whether you switch the +ve supply or the -ve supply..... Unless the fan body is earthed in which case you wouldn't want to switch the negative (you'ld have a constant +ve feed and an earthed fan body)....


Mr Whippy - 13/11/08 at 02:53 PM

New avatar for you once you have completed the wiring and celebrated with a few glassed of the Islay malt...

[Edited on 13/11/08 by Mr Whippy] Rescued attachment your_art_face.JPG
Rescued attachment your_art_face.JPG


Slater - 13/11/08 at 03:19 PM

Mr Whippy, you have too much time on your hands!


Mr Whippy - 13/11/08 at 03:24 PM

quote:
Originally posted by Slater
Mr Whippy, you have too much time on your hands!


yeah I know, currently designing a huge bean bag I’m going to make for Miss Whippys Christmas since my schedules are a work of art and I'm upto date


r1_pete - 13/11/08 at 03:29 PM

Job Done


big_wasa - 13/11/08 at 03:53 PM

I am going with A) I had an amp meter hooked up and decided I didnt need a relay


Myke 2463 - 13/11/08 at 07:20 PM

Ford usually use "A" good enough for me. No relay used on my car, just a fuse.