Wiring diagram would help as would the plug that goes in the back with a bit of wire, or a loom..
The car I was looking in had a K series and went to 8K and 140mph, looked really good imo, unlike the rest of the inside
Ta,
Steve
As above really, Stack dash out of an Elise or Exige???
Anyone got one spare?
not going spare, but I am using one. only cost £55. I am using an elise loom aswell so most of the system plugs together.
looked at it before, if you get the one from the k series engined car its pretty easy to wire in, on the later/toyota engined ones i couldn;t get the
speedo to work
might have a wiring diagram somewhere if you need one
Ray
Just toying with ideas atm. My Acewell doesn't look very trick to me anymore, already fitted a 52mm fuel gauge and temp gauge will be next.
Wiring diagram would help as would the plug that goes in the back with a bit of wire, or a loom..
The car I was looking in had a K series and went to 8K and 140mph, looked really good imo, unlike the rest of the inside
Ta,
Steve
quote:
Originally posted by Hammerhead
not going spare, but I am using one. only cost £55. I am using an elise loom aswell so most of the system plugs together.
Im sure I remeber this being disucssed in the past....
There was a company who made an adapter that plugged into the back of the later Elise dash modules and allowed you to plug in "generic"
sensors etc for speed, pressure, temp etc....
I have one in the Nova, well a vx220. very easy to wire in, elec speedo signal comes from astra digidash transducer, is calibrated by a pulse
converter (Made by a guy on migweb.co.uk). pretty much every thing else is plug n play bar the fuel gauge which currently works the wrong way round!
pics may not work as host is messing me around!
Video
http://www.youtube.com/watch?v=aVxYAAsmsfU
A fellow dax builder has one in his vauxhall engined rush. I think everything hooks up easily but the speedo, which hes using a converted ABS sensor to run.
Im pretty sure the elise uses an ABS sensor for the speedo signal as standard.