Board logo

Can anyone recommend me some simple IVA compliant switches?
eznfrank - 11/5/09 at 01:21 PM

I'm getting a bit bored of trying to work out how to link my ZX12 loom to my Sierra stalks and finally figured that the whole thing may be a little pointless anyway as I can't avoid having one or two buttons on the dash anyway (brake fluid test etc).

I reckon I need maybe 9 or 10 in total, and really like the savage switches but don't fancy shelling out the best part of £200!!.

Ive seen these little rocker switches which seem fairly unoffensive but I need some of them labelled and some as off-on-on, any ideas so that I can avoid having different types of switch??

[Edited on 11/5/09 by eznfrank]


pewe - 11/5/09 at 01:27 PM

Have a look at www.vehicleproducts.co.uk similar switches about £2.27 + vat. Lots of others as well.Their oval rocker switches passed SVA OK on mine.
Cheers, Pewe


vinny1275 - 11/5/09 at 01:32 PM

If you need to be IVA compliant, remember that switches and warning lights now have to be labelled according to their purpose....

HTH


Vince


iank - 11/5/09 at 01:54 PM

quote:
Originally posted by vinny1275
If you need to be IVA compliant, remember that switches and warning lights now have to be labelled according to their purpose....

HTH


Vince


Quite correct, but easy enough with a sheet of stickers, bottom item on this page.

http://www.vehicle-wiring-products.eu/VWP-onlinestore/switches/warninglights.php


oldtimer - 11/5/09 at 02:59 PM

Do the warning lights themselves have to have the logo on them or just next-to them??


big_wasa - 11/5/09 at 03:01 PM

ive just wired some Durite rocker switches for some one and they work very well.