hi all, what glue do you stick on magents to metal?

and the magents does not fall off.

thanks

stuart

2 part epoxy, put a dab on first and then encapsulate [cover] the magnet

I used the epoxy metal stuff, with a wrap of duck tape over the top.

I mixed up two small balls, pushed them onto the prop, then pushed the magnets into the balls and smoothed the epoxy around the magnets.

i drilled a small hole the same diameter as the magnet and glued it into that leaving the magnet about half thickness proud

quote:

---

Originally posted by richardh
i drilled a small hole the same diameter as the magnet and glued it into that leaving the magnet about half thickness proud

---

I stuck mine on with PU, 5000miles later its still there

right, then well i got ardiet metal 2part expoxy, i hope that will do.

i will clean the cv up, and make a nice bracket for the sensor to beheld in place with.

thanks

stuart

quote:

---

Originally posted by BenB

quote:

---

Originally posted by richardh
i drilled a small hole the same diameter as the magnet and glued it into that leaving the magnet about half thickness proud

---

You drilled the propshaft??????

---