Hi all,
I have a digidash 2 in my Tiger Avon 2.0 Zetec. The temp shows 0 when I start up, then rises steadily until 23 degrees centigrade when the fan kicks in.

After a long run out, amoungst traffic it shows max water temp being 23 degrees. Surely this can't be right, surely it should be more. Could it be the wrong sender as I bought the Tiger already built?

Cheers,

Neil

Hi Niel

It sounds as though the sender is not compatible with the dash,as the fan should not come on at 23 deg.my fan
comes on at 90 and off at 70.

Andy

[Edited on 27/6/09 by lotusmadandy]