I can't find a source for 2.8mm 4 way AMP Superseal connectors (must be 2.8mm to make a breakout connection) --- all the usual suspects only stock up to 3 way in 2.8.

are these the right ones?
http://www.kojaycat.com/amp%20superseal%20connectors.htm


edit, sorry, 2.8mm, perhaps not

[Edited on 1/9/09 by blakep82]

durite .

i may have some 4 ways but not 2.8mm .

I checked my Durite supplier, they don't list the 2.8mm above 3 way. So if they exist then chances are its OEM application only, so if you have seen them on a Ford loom, check with Ford. etc.

I don't suppose you want to use 2x 2 way?