Board logo

Jaguar XJS ECU diagram
speedyxjs - 8/9/09 at 03:48 PM

My new engine came with the loom attached to it but the wire were cut off at the bulkhead.
I have the ECU's but now need to find out what wire goes to what pin on the ECU.

Does anyone have any suggestions where to start? Going to Jaguar is the last resort as my local ones are a bunch of useless [enter suitable word here]!

Flamez - 8/9/09 at 03:56 PM

wiring diag from haynes manual?

speedyxjs - 8/9/09 at 03:57 PM

Iv looked but it only seems to show what wires go into the ECU, not where they all connect to.

sickbag - 8/9/09 at 04:02 PM

Is this any use?

http://www.jagweb.com/aj6eng/wiring_diagram.jpg

speedyxjs - 8/9/09 at 07:00 PM

quote:
Originally posted by sickbag
Is this any use?

http://www.jagweb.com/aj6eng/wiring_diagram.jpg


Sorry, should have said its for a 3.6 straight 6

sickbag - 8/9/09 at 09:05 PM

I thought the ECU might be the same across the engines.

Having grown up with various Series 1 and 2 XJ6's I found the rest of their site quite interesting, brought back many a happy memory helping my dad under the bonnet..