Last week I decided I wanted the wiring loom moved from my engine bay and hiden.

Well tonight got it all back in running and all working ok ..... Or so I thought??!!

The car (zx12 BEC) idles fine and revs at idle but as soon as I go to pull away the fuel pump cuts out and stays dissingaged for u till I turn the ignitin on and off a few times.

I'm stumped guys, checked everything andbefore I messed with it the car run and drove excellent.

Any suggestions welcomed.

Sounds like either the clutch switch or the neutral switch.

Mike

Hi mike, how can I check the switches?

I have a gear indicator and that's shoing 6th gear at idle but when I select the gear it shows 1st or 0 for neutral etc.

I think it's because I've shared it's live with the power commanders live. Could this be it do you think?

Tilt switch sensor? been moved and now facing wrong way?

Exactly when does it cut out? when you press the clutch, when you engage gear etc, does sound like the sidestand/gear lockout area..

I have moved the tilt sensor but it is sti facing up as the arrow shows.

However all my gut feelings are pointing to that as it may be on a slight angle. I'll chck that first I think.

It cuts out as soon as you go to pull off, I can pull off slowly and let the car crawl but if I touch the throttle it cuts out and fuel pump stays off.

Carefull with the arrow facing up thing. On the R1s 'up' means the face is up!



from your last post I would say def the tilt switch.

[Edited on 17/9/09 by Davg]

99.99% its a tilt sensor issue then.

Yes it's official I'm a pillock. I've fitted it totally wrong and on it's side don't ask me how.

well I'll reposition it in the morning.

Thanks guys!! God I love this site

Glad that's got it, cheers D