Board logo

Air Temp Sensor - Megasquirt
Paul (Notts) - 24/11/09 at 05:45 PM

Looking for a cheep source ( online) for an Air Temp Sensor to use with megasquirt 1

Any help appreciated..

Paul


sebastiaan - 24/11/09 at 06:04 PM

Buy it now!

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=330380270584

That'll do, you just need to figure out the curve (boiling water & ice & 20 degrees inside and measure resistance) and input the correct values into megasquirt (using easytherm).


Paul (Notts) - 24/11/09 at 06:42 PM

Link not working....


paulf - 24/11/09 at 09:27 PM

Your better off to get the correct one to match the standard ECU , lots of people have problems with easy therm.The other way is to change the bias resistor on the MS board to suit , a ford sender needs a 27k resistor to work correctly.
Paul

quote:
Originally posted by sebastiaan
Buy it now!

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=330380270584

That'll do, you just need to figure out the curve (boiling water & ice & 20 degrees inside and measure resistance) and input the correct values into megasquirt (using easytherm).