Board logo

acewell clock not working.
Danozeman - 8/4/10 at 07:29 AM

Does anyone know if there is a battery you can change in an acewell. The clock on mine always resets to 12:00 when you turn the ignition off and doesnt stay displayed. All the other memories stay so there must be some power still there.


flak monkey - 8/4/10 at 07:35 AM

I think the clock needs to have a permanent live supply to the dash to keep the time right. Everything else is remembered even if the power is removed/batt disconnected so sounds like you dont have a perm live?


turbodisplay - 8/4/10 at 07:54 AM

As above you need power for the clock to count time. Memorry does not require power, just like a USB memorry stick.

Darren


Danozeman - 8/4/10 at 09:29 AM

ah just looked at the wiring diagram again. Looks like the brown is permanent live. Im sure thats connect to something though, il have to check when i get home.


55ant - 8/4/10 at 09:53 AM

or only go out for a drive at lunch time?


Danozeman - 8/4/10 at 02:14 PM

and be out and back in less than 1 minute.