Board logo

Panduit Cable Labels ?
Tris - 4/5/10 at 03:37 PM

Hi all,

Ive been looking at getting a nifty labeling solution so i can label up the wiring harness on my zx12 as i dismantle it.

In my day job, ive come across 'Panduit UTP' labels, which come in a little book and are self adhesive labels which you write on and then wrap around the cable.

Does anyone know where i can get some of these ? A quick google search didn't turn up anywhere easily and there's nothing on ebay.

Cheers
Tris

dan__wright - 4/5/10 at 03:39 PM

not panduit but will prolly be cheaper.

www.cablemanstore.co.uk

part no pwc-pk-1 (they do a few sizes, change the 1 for 3, 6 or 36)

eznfrank - 4/5/10 at 03:59 PM

Masking tape, about 75p a roll!!

What are you doing with it, stripping out the unwanted bits or extending?

Tris - 4/5/10 at 04:04 PM

quote:
Originally posted by eznfrank
What are you doing with it, stripping out the unwanted bits or extending?


Depends on how brave i get .

My current thinking is to strip the bike loom back to just the bits required to run the engine. I will then do everything else (lights etc) in a new loom.

Cheers
Tris

Tris - 4/5/10 at 04:12 PM

quote:
Originally posted by dan__wright
not panduit but will prolly be cheaper.

www.cablemanstore.co.uk

part no pwc-pk-1 (they do a few sizes, change the 1 for 3, 6 or 36)


Thanks for the link but they wanted £10 to post a little book of labels via the online portal ! Just rang them to see if there's any other options available and a book is coming via Royal Mail for £4

Cheers
Tris

eznfrank - 4/5/10 at 04:30 PM

quote:
Originally posted by Tris
quote:
Originally posted by eznfrank
What are you doing with it, stripping out the unwanted bits or extending?


Depends on how brave i get .

My current thinking is to strip the bike loom back to just the bits required to run the engine. I will then do everything else (lights etc) in a new loom.

Cheers
Tris


That's probably easiest, I extended mine which was actually not too bad, the ZX12 wiring seems to lend itself to extension. it's the first bit of wiring I've ever done and all gone ok so far apart from a minor confusion with a dead relay.

bmseven - 4/5/10 at 07:59 PM

Cant remember the name of the company I get my Panduit stuff from will have a look tomorrow (They are at Bishops Stortford just off the M11)

EDIT - OK it just came to me
http://www.minitran.co.uk/

[Edited on 4/5/10 by bmseven]

ChrisW - 10/5/10 at 01:34 PM

Was just about to say Minitran! Great guys - had one order from them turn up today, and just placed another for more bits. Use them loads.

Speak to Scott and tell him Chris from Netrino referred you, please

Chris