Board logo

IVA friendly HT Leads
Blackbird Rush - 11/8/10 at 11:33 AM

After being let down by one supplier i'm after a set of HT leads with relavent markings for interfearence suppression.

As my current leads just unscrew from the boots all i need is the 7mm cable.

Anyone know where you can buy the correct cable by the M?

I could just use Halfords leads and cut the ends off as they say ISO (with a number on the lead) would these be OK for the IVA man?

Cheers for any help.

Ash


jabbahutt - 11/8/10 at 03:15 PM

I used budget Halfords leads that came in their own box and had SUPRESSED printed along them along with some numbers.

Don't know if that's any help.


Blackbird Rush - 12/8/10 at 09:50 PM

Had a chat with VOSA today, apparently a makers logo or name will surfice thus i have an old set of unipart labled ht leads i found in the shed, these have now been chopped up to length and used to replace my non marked leads.