Am going to try and make a wiring loom from scratch, cause i know absolutely nothing about it. And since all this is a major learning exercise, I think its worth a go. so question's

Anybody used this westfield diagram to wire the entire car

http://westfield-wor...ing_frames.html

would it be ok?

go for it. I used it some of it but i think it pretty good , had to mix mine with nissan wiring loom

I'm probably selling my MK loom pretty soon if it's any good.

I had a look at it, its not bad but the fog light needs some work to only come on with ignition and main lights on.

Its very easy to make a loom. Just run one thing at a time and and test it.

I started with the indicators Hazard's ect.

I can't get your link to open Femster...

^^^ me either

Have a look at the one's on Polevolt's website I used those but there are one or two things missing but it is a good start and you can easily add to it,

RD

THIS is just one sheet

[Edited on 5/10/10 by rallyingden]

ok, gonna get some wires ordered tomorrow. and let you know how i get on. ok I would note the fog light bit

try this

http://westfield-world.com/techelectric.html

its the new wiring diagram

Just do one circuit at a time, and test it before you move onto the next one.

Just don't use all one colour!!! You'll never fault find later.