Evening all, i bought one of these cyclone v2 alarm some time ago and fitted it some time ago but have only just come to test the immobiliser side of things and its not allowing power through as you would expect from an immobiliser but even when unarmed it still doesnt allow power through. i know i have it wired up correctly according to the instructions I have power to the alarm as its talking to me and arming and disarming, however im going to ring the company tommorrow to see if they have any suggestions or it might just be a faulty unit, thought id ask on here just incase others have fitted one of these and had simular problems or any advice. Thanks in advance
oh its being fitted to an 06 yamaha R1 engine