hi,

i have a 10 blade fusebox what is the best way to run from one power source and split to 10?



rubbish pic i know

You don't really want to split 1:10 and will need more like 2 banks of 5. One for permanent feed and the other for switched feed. Either way you can often run a common feed to each bank using the internal busbar (if it has one) Each feed will have to be individually fused as a safeguard.

quote:

---

Originally posted by RazMan
You don't really want to split 1:10 and will need more like 2 banks of 5. One for permanent feed and the other for switched feed. Either way you can often run a common feed to each bank using the internal busbar (if it has one) Each feed will have to be individually fused as a safeguard.

---

IIRC that will not pass IVA as you need lights, hazards and horn working with the ignition switched off ...... or are you wiring a track-only car?

So you have 10 connections each side? You can split the main feed wire into 10 smaller feeds but tbh I would choose a more suitable fusebox - much easier. This one has a side entry to a 6mm connection.
10 Way Blade Fuse Box Holder HIGH QUALITY on eBay (end time 19-Dec-10 20:35:33 GMT)


[Edited on 19-10-10 by RazMan]

quote:

---

Originally posted by RazMan
IIRC that will not pass IVA as you need lights, hazards and horn working with the ignition switched off ...... or are you wiring a track-only car?

You can split the main feed wire into 10 smaller feeds but tbh I would choose a more suitable fusebox - much easier. This one has a side entry to a 6mm connection.
10 Way Blade Fuse Box Holder HIGH QUALITY on eBay (end time 19-Dec-10 20:35:33 GMT)

[Edited on 19-10-10 by RazMan]

---