Can anyone point me in direction of a supplier of HT Lead end connectors to fit a ford coil pack. Ive fitted megajolt and have got a set of good quality HT leads that i want to change from distributor fitting to coil pack fitting. Also would i need a special tool to crimp them on or could i use pliers etc.

I bought scrap leads and took the ends of, and re crimped them on my Magnecor leads with a home made tool and vice.

yes i wondered whether that might be an option, ive got a spare set so will give it a go. Thanks Pete

Some crimping pliers have a small section for doing HT lead connections.

I bought a new set from http://www.megasquirt-v8.co.uk/index.php and used a BNC crimper to crimp them up.

Regards,
Dave