Well, the cars been getting on my wick all winter, tax disc arrived this morning so into the garage for an update....

Off with the 'Squirt and on with the Omex I bought at Stoneleigh last year...




Been fairly straight forward despite the Omex wiring diagram being a bit to be desired...

Anyway some questions for you knowledgeable peeps

I intend to use the cam sensor for sequential injection however theres no wiring or mention of it in the manual. Is it on one of the programmable outputs?

And, in order to enable sequential, or semi as it seems, there are two ingnition outputs that both split into two, is best to wire 1=3 and 2=4?

Finally I have an LC1 wideband set up, Omex only has info for narrow band. I think the LC has a narrow band output, can I use this and use the full 0~5v to power the gauge on the dash?

I thank you,
Steve

the omex 600 will only do semi sequential. you need a 710 for fully sequential.

set it up as wasted spark 1&4 2&3


edit.
forgot to say the wideband should work with the 600.

[Edited on 6/4/2011 by ashg]

Theres no wire for the VVT, any idea where it should be?