'Squirt came off bumper today destined for the Jago with RV8 power..



Its an Edis version, question is will it run an Edis8 just as well as a 4 and will the two injector wires be OK for 8 injectors?

Steve

Just finished converting my RV8 to megasuirt / edis 8.

Its should be fine running two banks of injectors (each of 4)

It will also run an eddis 8 as the only signals are pip and saw signals.

Be carefull of the Idle air control as it may need an external relay , unless Its been updated to handle the current. ( efi extra ones often have)

Paul

Does not look like you have the flyback board, need to use resistors on the injectors as PWM will not handle the load of 4 x 15ohm resistors.

I know from experince....