I wonder if anyone can help me.

I am connecting my blade loom into the sierra ignition switch but I need to check which wire goes where.

I have the following wires from the fireblade loom I need to connect to the sierra ignition switch:-

BlackWhite ignition wire from CDI unit
YellowRed starter relay wire

...and on the sierra ignition switch I have the following wires:-

Yellow (think this is just for the radio etc.)
Red
YellowBlack
BlackBlue

Just need to know which wires on the ignition switch the fireblade loom wires connect to.

Any help would be REALLY appreciated!!

thanks,
Rich.

hi rich. on the sierra switch, the red is the feed fro the battery (i fused mine but i dont think it is on the donor). bk/bl is the one to the starter soleniod, and the bk/yellow is the running one. not a clue about blade stuff, i got the zx9 book but no blade stuff...

here goes Rich....

the black/white goes to a fused feed.
(you could use the yellow/black as it will only become live when switch is on - this one is from memory as i cant find my notes to say as to when this becomes live)

the yellow/red goes to either starter button (if you have one)
or to the blue/black of the sierra switch