Hi, this is my first post Can anyone heolp me with disecting the engine harness from the main harness please, diagrams etc. I would be hugely greatfull. Mike

You'll find wiring diagrams here.

http://www.locostbuilders.co.uk/photos.php?action=gal& ;user=Guinness&folder=2009

Thank you

Are you using the bike switch gear? To get the engine running without the loom is actually very simple I can give you details if it helps?

Davie

The diagrams on here are for the later d3/4 etc not the c1. Theyre also complete harness's, Im after something that will clearly illustrate just the engine harness if anyone can help. Much appreciated, Mike

I'm abroad at the mo so don't have diagrams but I can write it out very easily, only 6 or 7 wires in total that need connected?

Hi Davie, thanks for your reply. Im using the bike; ignition switch, junction box, ignitor unit, coils, fuel relay pump, fuel pump, starter relay, neutral switch and light, oil pressure switch and light and obviously pick up coil, battery, starter and alty. I would be hugely greatfull if you can help me. Mike

If its possible Davie, it doesnt have to use all that, I just want to be able to start and stop it, for it to charge the alty and feed the ht leads (think thats all I need for it to run?) I can feed the fuel pump seperately as it was on the old engine, neutral light would be nice. Hope your enjoying your hols.

Hia Mate, still hoping for your assistance..

quote:

---

Originally posted by maccmike
Hia Mate, still hoping for your assistance..

---

Ah a noobie error haha. Yeah that would be great please. Hope your having a whale of a time.

No chance, I'm at work