hi all i need a bit of advice wiring up my lrs 707 starter motor im using on my zetec install

this is a picture of how the starter on my pinto was wired up + a wire on the spade connector(earth?)



and this is a pic of the zetec starter but not to sure how to wire it from how the old one was wired up




any help would be greatfully recieved,lewis.

You want the heavy cable from the battery on the pole
with the 13mm nut.Replace the old spade terminal with a 6mm
ring terminal and fit it to the m6 pole on the solenoid.

Simples.

Andy


Beaten to it

[Edited on 7/11/11 by lotusmadandy]

Wow quick responses thanks guys!