Board logo

LED Rain Light
johnny chimpo - 31/8/12 at 10:53 AM

Hi all, im looking to fit get a LED rain light and fit it to my rollcage as a high level brake light.

Can anyone recommend a good one to go for, preferably one that i dont need to add a resistor to.

There seems to be Plenty available ranging from £10 up to £100. Im just looking for a simple 52mm led rain light that wont break the bank, not something super dooper that is fia, msa and every other organisation compliant.

Cheers


trikerneil - 31/8/12 at 01:42 PM

I use a 52mm LED CLUSTER from Maplin as a fog light on my Trike.

HTH

Neil


johnny chimpo - 31/8/12 at 07:12 PM

Did you need to add a resistor?


trikerneil - 31/8/12 at 09:38 PM

I wired it a good few years ago and don't honestly remember - I don't think I added a resistor.

According to THIS SITE there should be a 22 ohm resistor in the circuit.

HTH

Neil


RK - 1/9/12 at 12:13 AM

That's just for flashers, not needed for a rain light. I MIGHT be wrong, but of course, I doubt it.