I've got some Dominator Headlights to fit to my Locost but I'm not sure what to do with the wiring. obviously it just comes out of the hole in the rear of the headlight.

Do people put this wiring in a heat-shrink/conduit/silicone hose etc? I've routed around for pics but can't find anything that shows me what has been done.

I have used 11mm split conduit and cable tied it to the mounting bracket. This then passes through an 11mm hole in the side panel.

There are probably tidier ways to do this though.



[Edited on 30/7/13 by Sloan85]

I have done the same with my twin photons. I used large bore heat shrink tubing over the convoluted tubing at the rear of the head light.

I used shower hose, cheap as chips, and has a lining to protect the wiring

Description

How about drilling holes in the mounting bar and threading the cables through to hide them?

quote:

---

Originally posted by coozer
How about drilling holes in the mounting bar and threading the cables through to hide them?

---