Board logo

dash two gear indication
beaver34 - 25/9/13 at 06:20 PM

hi,

my dash two gear indication is not working correctly, just wanted to pick the brains of someone that has got it working correctly

its a h pattern box, the issue i have is it flick between 4th and 5th gear when in 4th gear.

1 to third seem to work fine.

any one had this issue?

i had the diff out the heck the ratio and i think i have the correct box ratio's but going to recheck it all

thanks

jeffw - 25/9/13 at 07:25 PM

Dash2 only works it out from road speed and revs. You need to put the correct figures in to get the right gear out.....

beaver34 - 25/9/13 at 09:03 PM

quote:
Originally posted by jeffw
Dash2 only works it out from road speed and revs. You need to put the correct figures in to get the right gear out.....


Thanks for those wise words

jeffw - 26/9/13 at 05:35 AM

I wasn't trying to be annoying but I've had the same issue in the past. The calculated figures have to be correct otherwise you will have this issue.